Table of Contents
Advertisement
No sound? Wrong sound? When these or other problems occur, make sure to check the troubleshooting section in the
Operation Manual before assuming that the product is faulty. Many problems can be solved by carrying out the Initialize All Data
operation (below), after backing up your data to a USB flash drive. If the problem persists, consult your Yamaha dealer.
Restoring the factory default settings (Initialize All Data)
NOTICE
When the Initialize All Data function is carried out, all the Performances and songs in the User memory you have stored, as well as the
Utility settings for the overall keyboard settings will be overwritten with their defaults. Make sure you are not overwriting any important
data. Therefore, you should regularly save backups of important settings to a USB flash drive (refer to the Operation Manual).
1.
Open the Settings screen from [UTILITY] ’ Settings ’ System.
This calls up the Settings screen for the entire instrument.
2.
Tap Initialize All Data.
The confirmation screen appears.
To cancel the operation, tap the Cancel No button on the screen or press the [DEC/NO] button on the top panel.
3.
Tap the Yes button on the screen or press the [INC/YES] button on the top panel.
The Initialize All Data operation is carried out.
Troubleshooting
45
MONTAGE M Quick Guide
Advertisement
Table of Contents
