Reference
Performance
Operator Edit (Operator)
Form/Freq (Form/Frequency)
From the Form/Frequency display you can make all the waveform and frequency settings for Operators.
[PERFORMANCE] [EDIT] Part selection Operator selection [Form/Freq]
Operation
The full names of the available parameters are shown in the chart below, as they appear in the display.
Initial
Time
–
Level
Initial Level
Settings:
Time: 0 – 99
Level: -50 – +50
Spectral (Spectral Form)
Determines the "spectral form" of the selected Operator.
Settings:
Sine, All 1, All 2, Odd 1, Odd 2, Res 1, Res 2
Skirt (Spectral Skirt)
Determines the spread of the "skirt" at the bottom of the formant harmonics curve. Higher values produce
a wider skirt and smaller values produce a narrower skirt. This is not available when "Spectral" is set to
"Sine."
Settings:
0 – 7
Resonance (Spectral Resonance)
Determines the degree to which velocity affects the Resonance of the Spectral Form. The center frequency
moves to higher frequencies, letting you create a special resonance in the sound. This is active only when
"Spectral" is set to "Res 1" or "Res 2."
Settings:
0 – 99
MONTAGE Reference Manual
Edit
Normal Part (AWM2)
Attack
Decay
Attack Time
Decay Time
Attack Level
–
Search
Drum Part
Normal Part (FM-X)
Utility
Live Set
Common/Audio
Normal Part (FM-X) Edit
Common
Part Settings
General
Algorithm
Zone Settings
Zone Transmit
Pitch / Filter
Pitch
PEG/Scale
Filter Type
Filter EG
Filter Scale
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
2nd LFO
Control Assign
Receive SW
Operator
Form / Freq
Level
141