Filter Type - Yamaha Montage 7 Reference Manual

Reference
Performance
Filter
Type
From the Type display you can make comprehensive settings for the Filter unit. The available parameters
differ depending on which Filter type is selected here.
[PERFORMANCE]  [EDIT]  Part selection  Element selection  [Filter]  [Type]
Operation

Filter Type

Determines the Filter Type for the current Element. Basically, there are four different filters: LPF (Low Pass
Filter), HPF (High Pass Filter), BPF (Band Pass Filter) and BEF (Band Elimination Filter). For details on
settings, see the Synthesizer Parameter Manual PDF document.
Settings:
LPF24D, LPF24A, LPF18, LPF18s, LPF12+HPF12, LPF6+HPF12, HPF24D, HPF12, BPF12D, BPFw, BPF6, BEF12,
BEF6, DualLPF, DualHPF, DualBPF, DualBEF, LPF12+BPF6, Thru
LPF
Gain
Frequencies that are
"passed" by the filter
LPF24D: A dynamic -24 dB/oct Low-Pass Filter with a characteristic digital sound. Compared to the LPF24A type,
this filter can produce a more pronounced Resonance effect.
LPF24A:
A digital dynamic Low-Pass Filter with characteristics similar to a 4-pole analog synthesizer filter.
LPF18:
3-pole -18 dB/oct Low-Pass Filter.
LPF18s: 3-pole -18 dB/oct Low-Pass Filter. This filter has a smoother cutoff slope than the LPF18 type.
MONTAGE Reference Manual
Edit
Normal Part (AWM2)
Frequency
Cutoff
Frequency
Gain
Search
Drum Part Normal Part (FM-X)
Resonance
Gain
Frequency
Cutoff
Frequency
Resonance
Frequencies that are "passed" by the filter
Frequency
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
100