Yamaha Montage 7 Reference Manual page 128

Reference
Performance
Filter
From the Filter display you can apply filter settings to the Drum Part. These let you apply a low pass filter
and high pass filter to each individual Drum key.
[PERFORMANCE]  [EDIT]  Part selection  Key selection  [Filter]
Operation
Cutoff (Low Pass Filter Cutoff Frequency)
Use this parameter to set the cutoff frequency for the low-pass filter.
Settings:
0 – 255
Cutoff/Vel (Low Pass Filter Cutoff Velocity Sensitivity)
Set the velocity sensitivity of the Low Pass Filter Cutoff frequency. Positive settings will cause the Cutoff
Frequency to rise the harder you play the keyboard. A negative setting will have the opposite effect.
Settings:
-64 – +63
Resonance (Low Pass Filter Resonance)
Determines the amount of Resonance (harmonic emphasis) applied to the signal at the Cutoff Frequency.
Settings: 0 – 127
HPF Cutoff (High Pass Filter Cutoff Frequency)
Determines the Cutoff frequency of the High Pass Filter.
Settings:
0 – 255
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
128