Audio In - Yamaha Montage 7 Reference Manual

Reference
Performance

Audio In

Mixing
From the Mixing display you can adjust the volume settings of the Audio Part (the input signal from the A/D
INPUT [L/MONO]/[R] jacks) and the Digital Part (the input signal from the [USB TO HOST] terminal*).
* Only the sound of the Port which, among all Device Ports, is set to "Digital L/R."
[PERFORMANCE]  [EDIT]  PART [COMMON]  [Audio In]  [Mixing]
Operation
A/D In Input Mode/Digital In Input Mode (A/D Part Input Mode/Digital Part Input Mode)
Determines the signal configuration for the A/D Part/Digital Part, or how the signal or signals are routed
(stereo or mono).
Settings: L Mono, R Mono, L+R Mono, Stereo
L Mono:
Only the L channel is used.
R Mono: Only the R channel is used.
L+R Mono: The L and R channels are mixed and processed in mono.
Stereo:
Both the L and R channels are used.
NOTE The sound input only from the [L/MONO] channel is processed in mono.
Volume (A/D Part Volume/Digital Part Volume)
Determines the output level of the A/D Part/Digital Part.
Settings:
0 – 127
Pan (A/D Part Pan/Digital Part Pan)
Determines the stereo pan position of the A/D Part/Digital Part.
Settings: L63 – C – R63
Dry Level (A/D Part Dry Level/Digital Part Dry Level)
Determines the level of the A/D Part/Digital Part which has not been processed with the System Effect. This
is available only when "Part Output" is set to "MainL&R."
Settings: 0 – 127
Var Send (A/D Part Variation Send / Digital Part Variation Send)
Determines the Send level of the Audio Part/Digital Part signal sent to the Variation effect. This is available
only when "Part Output" is set to "MainL&R."
Settings:
0 – 127
MONTAGE Reference Manual
Edit
Normal Part (AWM2) Drum Part
Search Utility
Normal Part (FM-X)
Live Set
Common/Audio
Common/Audio Edit
Common/Audio
General
Audio In
Mixing
Routing
Ins A
Ins B
EQ
Motion Seq
Common
Lane
Control
Control Assign
Control Number
Effect
Routing
Variation
Reverb
Master FX
Master EQ
147