Table of Contents
Advertisement
Turning the Motion Sequencer on/off
The following settings are available for turning the Motion Sequencer playback on/off.
To play the Motion Sequence when the note is
pressed:
To play the Motion Sequence when the
[MOTION SEQ TRIGGER] button is pressed:
NOTE
"LaneSW" and "Trigger" are set as follows.
[EDIT] Part selection ELEMENT/OPERATOR [COMMON] [MOTION Seq] [Lane]
Using the Knobs to control Motion Sequencer
By pressing the Knob function [ARP/MS] button, you can use the Knobs 1 – 2 and 5 – 8 to control Motion
Sequencer playback. Try this out and listen for the changes in the sound. For details regarding the effect of
the Knobs, see Quick Edit
(page
Motion Sequencer functions which can be controlled by Knob operations
Knob 1 Knob 2
Editing Motion Sequences
You can create a custom Motion Sequence consisting of up to sixteen steps. For details about Editing, see
page
83.
Parameters related to Motion Sequencer
In this instrument, Motion Sequencer is considered as a virtual controller and can be selectable in the
"Source" parameter. The target parameter you want to control by Motion Sequencer is set in the
"Destination" parameter. For details, see
MONTAGE Reference Manual
Set the "LaneSW" parameter to "On," the "Trigger"
parameter to "Off," and the" Sync" parameter to "Off."
Set the "LaneSW" parameter to "On," the "Trigger"
parameter to "On," and the "Sync" parameter to "Off."
31).
Knob 5 Knob 6 Knob 7 Knob 8
page
89.
Basic Structure
(page
81)
Reference
Display (touch panel) config.
Performance Play (Home)
Motion Control
Mixing
Scene
Play/Rec
Normal Part (AWM) Edit
Drum Part Edit
Normal Part (FM-X) Edit
Common/Audio Edit
Category Search
Utility
Live Set
iPhone/iPad connection
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Motion Sequencer block
Effect block
Envelope Follower block
Controller block
Internal Memory
17
- Quick Links:
- Using the Montage Manuals
Hide quick links:
Advertisement
Table of Contents
