Casio KL-G2TC User Manual page 42

Bar Code Specifi cations
Number Number
Check
Bar Code of print of input
*1
digit
*3
digits digits
EAN-13 有 (Yes)
13
EAN-8 有 (Yes) 8
UPC-A 有 (Yes) 12
( 有
UPC-E 6
*2
(Yes))
4 to 22
4 to 22
無 (No)
digits
numbers
ITF
3 to 21
4 to 22
有 (Yes)
digits
numbers
4 to 22 2 to 20
無 (No)
digits
CODE39
4 to 22 1 to 19
有 (Yes)
digits
4 to 22 4 to 22
無 (No)
digits
CODABAR
(NW-7)
4 to 22 3 to 21
有 (Yes)
digits
40 EN
Number of
auto appended
*1
digits
characters
*4
Check
*1
digit
Numbers
12 - 1
Numbers
7 - 1
Numbers
11 - 1
Numbers
6 - -
digits,
even - -
*5
only
Numbers
digits,
odd - 1
*6
only
Numbers
*7
2 digits -
digits (0 to 9), alpha
characters
*7
symbols
2 digits 1
digits
(-, ., space, $, /,
Numbers (0 to
- -
digits 9), symbols (-, $,
:, /, ., +), alpha
characters (first
- 1
and last only) A
digits
to D
*1
The check digit is automatically calculated in accordance with input data.
For EAN-13, EAN-8, and UPC-A, and when using a check digit with ITF,
the check digit is appended at the end of the printed digits. When using a
check digit with CODE39 or CODABAR, the check digit is appended one
Input
digit before the fi nal digit.
*8
*2
UPC-E includes a check digit, but it is not printed as a numeral below the
bar code.
*3
The number of digits printed below a bar code equals the input characters
plus automatically appended characters.
(0 to 9)
*4
An error message is displayed whenever there are insuffi cient digits. The
printer will not allow input of too many digits.
(0 to 9)
*5
An error message appears and printing is impossible if an odd number of
digits are input when an ITF check digit is not being used. Append a zero
(0 to 9)
to the beginning of the digits and re-input.
*6
An error message appears and printing is impossible if an even number
(0 to 9)
of digits are input when an ITF check digit is being used. Append a zero
to the beginning of the digits and re-input.
*7
Both the start code and end stop code of CODE39 must be asterisks.
*8
An error message appears and printing is impossible if any characters
other than those specifi ed here are used.
*9
With CODABAR, A, B, C, or D can be used as the start code and stop
(0 to 9) code. An error message appears and printing is impossible if any other
character is used.
(A to Z),
+, %)
*9