Part 4 - Free Design Label; Creating A Free Design Label With Text You Input; Creating A Label With Multiple Lines Of Text; Dividing Text Into Blocks - Casio KL-G2TC User Manual

Part 4 - Free Design Label

Creating a Free Design Label with Text You Input

1.
On the main menu (page 15), select 新增 (New) and then press 執行 .
2.
Select 自由標籤 (Free Design) and then press 執行 .
3.
Input the text you want.
Refer to page 19 for information about the printing operation.

Creating a Label with Multiple Lines of Text

The number of lines you can include in a label depends on the width of the
tape you are using.
Maximum
Tape Width Number of
Lines
6mm 2
9mm 3
12mm 5
The character size changes automatically in accordance with the tape width
and the number of lines (Just Fit Print).
Even if you specifi ed character size manually (page 35), characters will be
re-sized automatically in accordance with the number of lines.
1.
Input the fi rst line of text and then press
28 EN
Maximum
Tape Width Number of
Lines
18mm 8
24mm 8
.
2.
Input the second line of text.
Character size adjusted
according to number of
lines.
Line break symbol
(not printed)
To delete a line break, press
delete a line break symbol by pressing
The Imager shows something like 5/8 when printing with 微小 (Small Font).
5/8 means there are eight lines and the cursor is in line 5.
Printing with 微小 (Small Font)
The message 行數超限 (Too Many Lines) appears on the display and
printing becomes impossible when the number of lines is greater than those
allowed for the width of the loaded tape cartridge. If this happens, reduce
the number of lines or load a tape cartridge of the appropriate width.

Dividing Text Into Blocks

You can assign label text to individual blocks and then specify a print format
and number of lines for each block.
Sample Print
Block
Created Label
Layout (Imager)
to delete the line break symbol. You can not
.
page 37
18mm wide
tape
Block
Two lines (page 28)
Vertical text (page 29)