Number
24mm, 18mm
Format
of Lines
wide
A
B
3
C
D
* Smaller printing with a frame.
Important!
You cannot specify the character size for a line of text when any one of the
conditions below exists.
When 6mm wide tape is loaded in the printer
When there are more than three lines of text
When a character size is specifi ed for specifi c characters (page 35)
1.
Input text.
2.
Press 功能 and then 印字倍數 .
3.
Select 行單位 (Line Unit) and then
press 執行 .
12mm wide
9mm wide
1×1
1×1
-
1×1
1×1
1×1
-
2×2*
1×1
2×2*
-
1×1
2×2*
1×1
-
1×1
4.
Select the format you want to use
and then press 執行 .
-
-
Important!
-
Either of the events below will cause a line character size setting to be
cancelled automatically.
Changing the number of lines
Specifying the size of specifi c characters (page 35)
-
■ Small Font
Certain number of line (number of input lines or the number of lines in a
selected format) and tape width combinations may cause 微小 (Small Font) to
become selected.
A pointer will appear next to 微小 (Small Font) on the right side of the
display when this happens.
In the case of a free design label, the Imager will show a fractional value.
Important!
Font and proportional settings become invalid while 微小 (Small Font) is
selected.
Text that has a character style or effect applied, as well as illustrations and
user characters may not print correctly while 微小 (Small Font) is selected.
Selected format
Imager
37
EN