Specifying Text Alignment - Casio KL-G2TC User Manual

Specifying Text Alignment

Specifying Text Alignment within a Block
Use the procedure below to specify text alignment within a block.
Fixed block length
Align left
Align center
Align right
Equal
1.
Input text and divide it into blocks (page 28).
2.
Move the cursor to the block whose text alignment you want to change,
press 功能 and then press 格式 .
If there is only one block in the label, advance to step 5.
3.
Select 區段格式 (Block Form) and then press 執行 .
4.
Select 僅此區段 (One Block) and then press 執行 .
5.
Use the and arrow keys to
display the 文字排版 (Text
Alignment) setting screen.
6.
Select the desired alignment.
7.
Use the and arrow keys to display the 區段長度 (Block-Length)
setting screen.
34 EN
8.
Select 固定 (Fix) and then press the
arrow key.
This highlights the value.
9.
Specify a value that is greater than the original value and then press 執行 .
Direct input of values is also supported.
When there is more than one line of text, you can specify alignment
even when 自動 (Auto) is selected for the 區段長度 (Block-Length)
setting. Doing so affects the line of text with fewest characters, as
shown below.
Align left Align center
Specifying Label Block Alignment
You can use the procedure below to specify the overall alignment of blocks
within a label.
Align left
Equal
Align center
Align right
Align right Equal