Creating A Large Label By Combining Smaller Parts (Large Label) - Casio KL-G2TC User Manual

Creating a Large Label by Combining Smaller
Parts (Large Label)
You can print multiple parts and then assemble them into a large, multi-part
label.
Example: To create a sign consisting of two parts
Important!
Make sure that a 12mm wide or wider tape cartridge is loaded in the printer.
Printing on an 18mm wide tape or 24mm wide tape will result in margins
above and below the printing. Trim away the margins before assembling the
parts into a fi nal label. When using 18mm or 24mm wide tape, printing on
transparent tape and overlapping of the pieces is recommended.
1.
On the main menu (page 15), select 新增 (New) and then press 執行 .
2.
Select 放大列印 (Enlarged) and then press 執行 .
3.
Input text and then press 執行 .
4.
Specify the size of the fi nal (combined label) text and then press 執行 .
Tape width
2 段 (2 pieces)
12mm 24mm
18mm 30mm
24mm 30mm
Text Size
3 段 (3 pieces) 4 段 (4 pieces)
36mm 48mm
45mm 60mm
45mm 60mm
"2 段 (2 pieces)" means "printing is divided between two parts". Printing can
be divided among up to four parts.
5.
Select 列印 (Print) and then press 執行 .
A preview image (page 19) of the parts
that make up a large label cannot be
displayed.
6.
Specify which of the parts of the label you want to print and then press
the arrow key.
Normally select 全部 (All) here.
7.
Specify a cut mode (page 21) and then press 執行 .
When printing multiple parts that contain a large amount of text, you
may not be able to print all of the parts with a single tape cartridge. In
this case, printing one part of a time while keeping an eye on how much
tape remains in the cartridge you are using is recommended. If a tape
cartridge runs out of tape during printing, press 取消 to stop printing,
replace the cartridge, and then restart printing.
Printing text that has a lot of black or performing continuous printing
can cause the printer to overheat. If this happens, printing will pause
and the message 正在準備列印 (Please Wait) will appear on the printer
display. Printing will resume automatically when the printer returns to
normal temperature.
If printing starts to pause with the message 正在準備列印 (Please Wait)
on the display too frequently, try lowering the print density setting.
Confi guring Print Format Settings
You can confi gure the print format settings below as you input text.
Vertical or horizontal text direction（方向）
Mirror printing enable/disable（鏡射）
While inputting text, press 功能 and then 格式 to display the print format
setting screen. Use the screen to confi gure the settings you want.
27 EN