5057-XXX
is now stuck to the transfer belt due to the relative electrical differences between the negative electrical charge
Previous
of the inner conductive layer of the drum and the positive electrical charge of the paper.
Next
Go Back
HVPS
-VDC
DRUM
-VDC
Transfer roll
Sheet of paper
Cleaning
The Cleaning Blade removes any toner that remains on the drum after the transfer process. The toner that the
Cleaning Blade removes is collected inside the sealed PC Cartridge and reused.
Used Toner
-VDC
Cleaning Blade
Charge roll
DRUM
Discharge
At both the start and the end of each individual printer cycle, the erase lamps electrically clean the drum. The
light emitted removes any residual DC charge that was left from the previous print cycle.
1-31
General information