Sensor (Media On Belt) Late Jam - Lexmark C935 Service Manual

Step
4 POR the machine.
Does the error continue?

200.03 Sensor (media on belt) late jam

Step
1 Check the media condition.
Is the media in the tray crumpled, curled or damaged?
2 Check the media position.
Does the media touch the sensor (media on belt)?
3 Check the 2nd transfer roll assembly for excess wear or
damage.
Is the above component free of excess wear and damage?
4 Check the sensor (media on belt) for proper operation.
1. Enter the Diagnostics Menu.
2. Select BASE SENSOR TEST.
3. Select Media Path.
4. Select Media on belt.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
5 Check the sensor (media on belt) for proper connection.
Is the above component properly connected?
6 Perform a print test.
Does the error continue?
Check
Check
Yes
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-93.
Yes
Replace the Go to step 2.
damaged media
with new.
Remove the Go to step 3.
media.
Go to step 4. Replace the 2nd
transfer roll
assembly.
Go to "2nd
transfer roll
assembly
removal" on
page 4-35.
Go to step 6. Go to step 5.
Replace the Replace the
sensor (media on connection.
belt).
Go to "Sensor
(media on belt)
removal" on
page 4-30.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-93.
Diagnostic information
5057-XXX
Previous
No
Next
Go Back
No
2-27