Sheet Dual Input (Ttm)—Tray 3 Rear Cable Assembly Removal - Lexmark C935 Service Manual

2000-sheet dual input (TTM)—tray 3 rear cable assembly removal
1. Remove the tray module left cover. See
page 4-123.
2. Remove the tray module left cover. See
page 4-123.
3. Remove the media tray 3 assembly. See
removal" on page
4. Remove the tray 3 front cover. See
page 4-128.
5. Remove the E-clip with a prying tool securing the front lift cable pulley (A) to the tray lift shaft assembly (B).
6. Gently move the tray lift shaft assembly (B) toward the rear of the tray, and detach the rear bushing (C) from the
frame.
Note: Do not remove the front lift cable pulley (A), or the front lift cables will become detached.
7. Move the rear portion of the tray lift shaft assembly (B) away from the frame.
"2000-sheet dual input (TTM)— tray module left cover removal" on
"2000-sheet dual input (TTM)— tray module left cover removal" on
"2000-sheet dual input (TTM)—TTM media tray 3 assembly
4-128.
"2000-sheet dual input (TTM)—tray 3 front cover removal" on
5057-XXX
4-129
Repair information
Previous
Next
Go Back