Setting Access Codes (External Line Prefixes); Setting Pauses - Siemens Gigaset S675 IP Manual

Setting access codes (external line prefixes)

Depending on your PABX, you must dial an access code before making external
calls to obtain an external line. You can store this access code in your phone. It
is then added automatically to the numbers, e.g. when dialing using the Calls
list.
¢
v Ð
Access Code
~
a
If an access code is set, the following applies:
u
The access code is added automatically when dialing from the Calls list/
Answering Machine list and when dialing emergency numbers.
u
When dialing manually and dialing numbers from the directory, you must
add the access code yourself.

Setting pauses

Changing pause after line activity
You can set the length of the pause inserted between pressing the Talk key c
and sending the phone number.
v N 5 O L
~
Changing the pause after the Flash key, access code
You can change the length of the pause if your PABX requires this (
the user guide for your PABX).
v N 5 O
~
¢ ¢
Base Add. Features
Select and press
§OK§
Enter or edit the access code (maximum three characters) and
press .
§OK§
Press and hold (idle status).
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Enter a number for the length of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and press
Operating the base station on the PABX
.
.
§OK§
§OK§
£
refer to
.
143