Setting Up The Handset For Use - Siemens Gigaset S675 IP Manual

Hide thumbs Also See for Gigaset S675 IP:
Table of Contents

Advertisement

First steps

Setting up the handset for use

Inserting the batteries and closing the battery cover
Warning
Use only the recommended, rechargeable batteries (
ventional (non-rechargeable) batteries or other types of batteries could result
in significant health risks and personal injury. For example, the outer casing of
the batteries could be destroyed or the batteries could explode. The phone
could also malfunction or be damaged as a result of using batteries that are not
of the recommended type.
¤
Insert the batteries with the polarity
in the correct direction.
The polarity is indicated in/on the
battery compartment.
The handset is activated automatically.
You will hear a confirmation tone.
¤
To open the battery cover, for
instance to replace the batteries,
remove the belt clip (if
attached). Insert a coin into the
cavity on the casing, then pull
the battery cover in an upward
direction.
14
The display is protected by a plastic film. Please remove the pro-
tective film!
£
Page
201). Using con-
¤
First align the notches on the
side of the battery cover with
the lugs on the inside of the
casing.
¤
Then press the cover until it
clicks into place.

Advertisement

Table of Contents
loading

Table of Contents