Activating/Deactivating The Automatic Version Check; Copying The Date/Time From Time Server - Siemens Gigaset S675 IP Manual

Setting the phone with the PC
This setting is automatically used for this particular firmware update. The URL
in the
Data server
updates. You will have to re-enter the IP address and file name to carry out
another update with a firmware file on your local PC.
Please note
If an error occurs during a firmware update from a local PC, the most recent
version of the firmware is automatically downloaded from the Internet.

Activating/deactivating the automatic version check

When the version check is activated, the phone checks on a daily basis whether
the Gigaset configuration server has a new version of the phone firmware/pro-
vider profile (general provider data),
If a new version is available, a notification is sent to the handset and the Mes-
sage key flashes. You can then perfom an automatic update of the firmware
£
( Page
¤
Open the following Web page:
¤
Select
automatic version check.
Select
¤
Select
Please note
If the telephone is not connected to the Internet at the time when the check
for new firmware is to be carried out (e.g. because the router is deactivated),
the check is carried out as soon as the phone is reconnected to the Internet.

Copying the date/time from time server

The date and time are shown in the idle display of registered handsets. They are
important, for example, for stating the correct time in the Calls list and for the
"anniversary", "appointments" and "alarm clock" functions.
There are two methods for updating the time and date on your base station:
manually with one of the registered handsets (
synchronization with a time server on the Internet.
Activate/deactivate synchronization with a time server as follows:
¤
Open the following Web page:
¤
In the
activate synchronization between base station and a time server. If you
select
this case set the time and date manually using a handset.
¤
The Last synchronisation with time server
tion compared the time and date settings with a time server.
¤
In the
from which the base station should adopt its time and date settings (maxi-
188
field is saved and used again for subsequent firmware
137) or carry out a provider data update.
after
Yes Automatic check for software/profile updates
if you do not want a version check to be carried out.
No
Set to save the changes.
Automatic adjustment of System Time with Time Server
the base station will not adopt time settings from a time server. In
No
field, enter the Internet address or name of the time server
Time Server
¢
Settings Miscellaneous.
£
Page
¢
Settings Miscellaneous.
field shows the last time the base sta-
to activate the
16) or automatically by
field select
Yes
to