Entering Local And Extra Area Codes - Siemens Gigaset S675 IP Manual

Setting the base station via the handset
When making calls:
¤
Press the Talk key c briefly to make the call via the default connection.
¤
Press and hold the Talk key c to make the call via the other connection
type.
ú For information on how to make the setting on the Web configurator,
£
Page

Entering local and extra area codes

Use the following guidelines to make local calls (calls to the local fixed line net-
work):
u
Depending on the exchange, area codes are not dialed for local calls via your
fixed line network. However, all calls are stored in the Calls list with access
codes. To be able to call back a caller using the Calls list, you must store the
local area code in the phone in whose area your phone is being used. If your
phone is in a "multiple area code" area, you must also enter the other area
codes that belong to this area as extra codes.
u
With local calls via your VoIP connection the area code must also be dialed.
If you have stored your area code in the phone and activated the
code for local calls through VoIP
is dialed automatically when dialing numbers without an area code (e.g.
when dialing from the directory).
ú How to enter the area code with the Web configurator,
Entering a local area code
¢
v Ð
~
§Save§
a
Entering extra codes
¢
v Ð
q
~
§Save§
Repeat the above steps until all the extra codes have been entered for your
area. A maximum of 5 extra codes can be stored.
a
136
168.
¢ ¢
Telephony Area Code
Enter the local area code.
Press the Display key.
Press and hold (idle status).
¢ ¢
Telephony Extra Codes
Select an entry ("–––" = blank entry) and press
Enter the extra code.
Press the Display key.
Press and hold (idle status).
£
option ( Page 172), the area code entered
Predial area
£
Page 172.
.
§Edit§