Refrigeration Removal and Replacement Procedures
Evaporator
1
Remove front panel.
2
Remove evaporator cover.
3
Remove right side panel.
4
Remove top panel.
5
If the machine was in operation, push and release the Harvest button to warm up the
evaporator.
6
Disconnect electrical power.
7
Remove harvest assist solenoid
8
Recover refrigerant.
9
Remove curtain
10
Remove water distributor
11
Release ice thickness sensor
12
Remove water distributor bracket from the top of the evaporator
13
Connect nitrogen bottle to discharge access port. Open both access valves.
14
Open nitrogen valve
15
Unsweat the inlet and outlet refrigerant tubes. Use caution when heating the tubing, do
not damage the freezing compartment walls.
16
Shut nitrogen valve.
Electrical Shock Hazard.
Disconnect electrical
power before beginning.
September 2006 Page 112