Resetting The P/M (Preventive Maintenance) Counter - Panasonic DP-C405 Service Handbook

2.5.

Resetting the P/M (Preventive Maintenance) Counter

When the machine reaches the preset P/M Cycle, it will show "Call for P/M" on the LCD Display. The PM
Counter can be reset by following the procedures below.
1. Perform the P/M (Preventive Maintenance), refer to sections 2.3. and 2.4.
2. Press the "Function", "Copy", and the "3" keys simultaneously on the Control Panel.
3. Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000, except for DP-C322 Series).
4. Press the "8" key on the Control Panel, and then press the "Start" key to enter the F8 Service Mode.
(Service Adjustment).
5. Reset the desired Counter(s) on the list below.
6. Press the "Stop" key first on the Control Panel, and then press the "Function", and the "C (Clear)"
keys simultaneously to return to standby.
No. Mechanical Parts
i-ADF Unit
1 Pickup Roller
2 Paper Feed Roller
3 Separation Roller
Fuser Unit
9 Fuser Belt Unit
10 Fuser Main Unit
Complete Fuser Unit
- (Fuser Belt Unit, and
Fuser Main Unit)
Intermediate Transfer Unit
Intermediate
11
Transfer (IT) Belt
First Transfer Roller
12
(FTR)
Drive Roller Brush
13
Assembly
Ver. 1.1
Replace
Ref.
Cycle
No. Counter
(Sheets)
511 240K
508 240K
F7-02-12
ADF Count
610 240K
F7-02-65
Fuser Belt
Remain
4926 120K
Count
(Count
Down)
F7-02-66
Fuser Main
Remain
4927 240K
Count
(Count
Down)
4815 -
3419 240K
F7-02-51
Belt Life
3546 240K
Count
Down
3635 240K
Ref. Replace
Alarm
PM
Display Enter the Copy Service Mode F5-
(Machine 87 (ADF PM Cycle), and change to
Continues the desired value.
Operating)
119K:
Perform "F8-26 Fuser Belt Counter
Alarm
Reset".
(F7-02-65 Fuser Belt Remain
121k:
Count is also initialized by this
Machine
operation)
Stops
239K:
Perform "F8-27 Fuser Main
Alarm
Counter Reset".
(F7-02-66 Fuser Main Remain
241K:
Count is also initialized by this
Machine
operation)
Stops
Perform "F8-26 Fuser Belt Counter
Reset", and "F8-27 Fuser Main
Counter Reset".
- - (F7-02-65 Fuser Belt Remain
Count, and F7-02-66 Fuser Main
Remain Count are also initialized
by this operation)
239K:
Perform "F8-29 Belt Counter
Alarm
Reset".
(F7-02-51 Belt Life Count Down is
241K:
also initialized by this operation)
Machine
Perform "F8-30 Color Reg".
Stops
64
DP-C405/C305/C265
Reset
Counter
FEB 2008