3.3.16. Recording Paper Creases
Is the recording paper damp?
Are there any foreign particles,
or stains in the paper path?
Is the recording paper skewing?
Are the Fuser Belt, and Pressure
Roller surfaces soiled, or are
there any foreign particles, or
stains in the Fuser Unit?
Ver. 1.1
START
Yes
No
Yes
No
Yes
No
Yes
No
END
308
Replace the recording paper.
Remove any obstructions and / or
clean the paper path.
Ensure the paper is set correctly in
the Paper Tray, and that the Paper
Guides are properly adjusted.
1. Remove any foreign particles
and / or clean the stains.
2. Replace the Fuser Belt Unit.
3. Replace the Fuser Unit.
DP-C405/C305/C265
FEB 2008