Panasonic DP-C405 Service Handbook page 458

4.2.6. Fax Service Mode 6 (RAM Initialization)
Initializes RAM, and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Set the machine to Service Mode, and press the "9" key on the Control Panel.
↓
Press the "Start" key to enter the F9 Service Mode on the Control Panel.
↓
Select "00 Fax Service Mode" on the Touch Panel display.
↓
Scroll the menu with the "
↓
Select the desired Mode on the Touch Panel display, and then select the "Yes" button (initialize RAM),
or the "No" button (cancel).
↓
Select the "Close" button four time on the Touch Panel display.
↓
Press the "Function", and the "C (Clear)" keys simultaneously on the Control Panel to exit the Service
Mode.
No. Initialize Mode
01 PARAMETER INITIALIZE
02 JOURNAL CLEAR
03 AUTO DIAL CLEAR
04 PROGRAM DIAL CLEAR
05 LOGO/ID/PSWD CLEAR
06 LBP ERROR LOG CLEAR
07 SHIPMENT SET
08 FLASH MEMORY CLEAR
09 ALL JOB CLEAR
Ver. 1.1
" button on the Touch Panel display, and select "06 RAM Initialize".
RAM Initialization Table
Restores the Fax, and Function Parameters to default values.
Note: Turn the Power Switch to the OFF, and back to the ON
position to enable the parameter settings.
Clears the Journal contents.
Clears the One-touch, ABBR Numbers, and Phone Books.
Clears the Program keys.
Clears the Logo, ID, Polling Password.
Clears the Printer Error Log.
Deletes all setting information, except parameter number 80
and 81, then set default values.
Deletes all information in the Flash Memory.
Clears all Jobs stored in Flash Memory.
458
Description
DP-C405/C305/C265
FEB 2008