Panasonic DP-C405 Service Handbook page 327

Code
J63 1. The Paper Path Sensor
in the Saddle. (DA-FS405/FS356/FS325)
2. The Paper Path Sensor
sensor is activated. (DA-FS405/FS356/FS325)
(Refer to Service Manual Sect 12.1.2.5. Saddle Unit)
J64 1. The Puncher is not activated correctly. (DA-FS405/FS356/FS325)
2. The Punch Sensor
(Refer to Service Manual Sect 12.1.2.6. Punch Unit)
J65 1. The Paper Exit Sensor (1819-27) does not detect paper within a predetermined
time in the Finisher. (DA-FS402/FS350/FS320)
2. The Paper Exit Sensor (1819-27) does not go Off within a determined time in the
Finisher. (DA-FS402/FS350/FS320)
3. The Paper Exit Sensor
(DA-FS402/FS350/FS320)
J66 The Stapler is not activated correctly. (DA-FS405/FS356/FS325)
J70-79 (See the following table below)
J80 The Automatic Duplex Unit (ADU) Paper Path Sensor 0
paper within a predetermined time.
J81 The ADU Paper Path Sensor 1
predetermined time.
J82 The ADU Paper Path Sensor 2
predetermined time.
J83 The ADU Paper Path Sensor 0
J86 1. The ADU Paper Path Sensor 0
2. The ADU Paper Path Sensor 0
starts rotating.
J87 1. The ADU Paper Path Sensor 1
2. The ADU Paper Path Sensor 1
starts rotating.
J88 1. The ADU Paper Path Sensor 2
2. The ADU Paper Path Sensor 2
starts rotating.
J92-94 (See the following table below)
J96 The Printer Sequence Jam 4: System Timer detection error after Printing.
J97 The Printer Sequence Jam 3: System Timer error during Printing process.
J98 The Printer Sequence Jam 2: System Timer error during Printing Preparation.
J99 The Printer Sequence Jam 1: 2-sided printing did not start after a determined time has
lapsed.
<J70~79 and J92~94 Codes for i-ADF>
Code
J70 The ADF Registration Sensor 1
predetermined time in the ADF.
J71 The ADF Registration Sensor 1
predetermined time in the ADF.
J72 1. The ADF Registration Sensor 2
predetermined time after the ADF Registration Sensor 1
2. The ADF Registration Sensor 2
predetermined time after the ADF Registration Sensor 3
Ver. 1.1
Jam Error Codes (J Code) Table
Contents
(PI10) does not detect paper within a predetermined time
(PI10) does not go Off within a determined time after the
(PI11) goes On before the start of initialization.
(1819-27) detects paper before the start of initialization.
(1819-31) does not detect paper within a
(1819-07) does not detect paper within a
(1819-38) does not go Off within a determined time.
(1819-38)
(1819-38)
(1819-31)
(1819-31)
(1819-07)
(1819-07)
Contents
(401-06) does not detect paper within a
(401-06) keeps dedicating paper after a
(401-08)
(401-08)
327
(1819-38)
detects paper before initialization.
detects paper before the Feed Roller
detects paper before initialization.
detects paper before the Feed Roller
detects paper before initialization.
detects paper before the Feed Roller
does not detect paper within a
(401-06)
does not detect paper within a
(401-09)
DP-C405/C305/C265
does not detect
is activated.
is activated.
Section
Finisher
Saddle
Finisher
Punch
Finisher
ADU
Printer
ADU
Section
ADF
FEB 2008