Table of Contents
Advertisement
11 Configure the settings relating to images and audio [Image/Audio]
•
Preset: Performs the preset movement to each specified back focus position when switching between
color and black & white images. The preset position is the back focus position specified last time, which
was automatically memorized for each of color images and black & white images.
•
Fix: Fixes the position after adjusting the back focus either automatically or manually.
•
Default: Auto
[Close] button
Click this button to close the "Back focus" setup menu.
11.7 Adjust the angular field of view using the extra
optical zoom function (WV-SPN631/WV-SPN611)
Click the [Setup>>] button of "Extra optical zoom" on the [Image quality] tab of the "Image/Audio" page.
(®page 97)
It is possible to adjust the angular field of view using the extra optical zoom function.
•
: Click this button to adjust the zoom ratio to the "Wide" side.
•
: Click this button to set the zoom ratio to x1.0.
•
: Click this button to adjust the zoom ratio to the "Tele" side.
•
Note
:
SPN 631
SPN 631
•
When "2 mega pixel [16:9](30fps mode)" or "2 mega pixel [16:9](60fps mode)" is selected for "Image
capture mode", the maximum zoom ratio of the extra optical zoom becomes x3.0.
•
When "2 mega pixel [4:3](30fps mode)" or "3 mega pixel [4:3](30fps mode)" is selected for "Image
capture mode", the maximum zoom ratio of the extra optical zoom becomes x2.5.
:
SPN 611
SPN 611
•
The maximum zoom ratio of the extra optical zoom becomes x2.0.
114
Operating Instructions
: Click these buttons to adjust the horizontal/vertical position of the image after zooming.
Advertisement
Table of Contents
