Table of Contents
Advertisement
5 Transmit images onto an FTP server
5.3 Save images on the SD memory card when
images fail to transmit using the FTP periodic image
transmission function
Images that have failed to transmit using the FTP periodic image transmission can be saved automatically on
the SD memory card. It is possible to select a trigger to save images on the SD memory card on the [SD
memory card] tab of the "Basic" page. (®page 54)
To use the SD memory recording function featured in Panasonic network disk recorder, select "Off" for "FTP
periodic image transmission" (®page 166) and "FTP error" for "Save trigger" of "Recording stream
1" (®page 58).
Note
•
When "On" is selected for both the alarm image transmission function and the FTP periodic image
transmission function, the alarm image transmission function will be given priority over the FTP periodic
image transmission function. Also, when "On" is selected for the "FTP transmission retry" FTP setting
(®page 165), alarm images will be retransmitted if there is an FTP transmission failure. Therefore, if
there is continuous retransmission due to network problems or other factors, periodic transmission will
not be performed and images that fail to be transmitted with the FTP periodic image transmission will
not be saved to an SD memory card.
IMPORTANT
•
We make no guarantee for any damages of files on the SD memory card incurred by malfunction or
error occurrence in files saved in the SD memory card regardless of what the cause may be.
30
Operating Instructions
Advertisement
Table of Contents
