Table of Contents
Advertisement
11 Configure the settings relating to images and audio [Image/Audio]
11.9 Configure the VIQS setting
Click the [Setup>>] button of "VIQS" on the [Image quality] tab of the "Image/Audio" page. (®page 97)
VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to change
the images of a specified area.
It is possible to enhance the image quality of the specified range within a shooting area (image).
It is also possible to moderate the image data size by lowering the image quality of other areas.
The VIQS setting is available only for H.264 images.
Up to 8 VIQS areas can be set.
To check the image after configuring VIQS, when H.264 images are selected under "Stream", you can check
the image by pressing the [Confirm] button. You can also check by displaying an H.264 image on the "Live"
page.
[Area]
When selecting a VIQS area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered
in the order of selection.)
[Status]
Select "On" or "Off" to determine whether or not to use the VIQS area.
•
On: The VIQS area will be set.
118
Operating Instructions
Advertisement
Table of Contents
