Table of Contents
Advertisement
14 Configure the settings related to advanced view [Advanced view]
[Self return time]
Configure how long cropping images are transmitted for when an alarm occurs. When the set time has passed,
cropping images stop being transmitted and the camera starts transmitting full-screen images. Available only
when "On" is selected for "Alarm action".
10s/20s/30s/1min/2min/3min/5min
Default: 30s
[Sequence]
Using a maximum of 4 cropping outlines, determine whether or not to operate the sequence from the following
settings. The sequence operates in the order of the numbers assigned to the cropping outlines. Available only
when "Off" is selected for "Alarm action".
Off/5s/10s/20s/30s
•
Default: Off
[Set] button
Applies the cropping, camera action on alarm, home area, self return time, and sequence settings.
IMPORTANT
•
The cropping outline may move out of alignment when the "Image capture mode" setting is changed.
Make sure to check the cropping outline after changing the "Image capture mode" setting.
•
The cropping outline may move out of alignment when the "Zoom/Focus adjustment"
or "Extra optical zoom"
SF V 611L
SF V 611L
cropping outline after changing settings for "Zoom/Focus adjustment" or "Extra optical zoom".
•
The alignment of the cropping outline displayed during configuration might be slightly changed after
the [Set] button is clicked.
•
"Alarm action", "Home area", "Self return time", and "Sequence" are unavailable when "H.264(all)" is
selected for "Cropping".
150
Operating Instructions
setting is changed. Make sure to check the
SPN 631
SPN 631
SPN 611
SPN 611
SF V 631L
SF V 631L
Advertisement
Table of Contents
