Commands Usage In Profiles - Motorola CA50 Developer & User Manual

J - 2 CA50/UCA Client & Server Developer & User Guide

Commands Usage in Profiles

Profiles can be modified to customize menus displayed on the device. This section describes the commands
and how to use them on CA50 menus.
Profile Commands and Usage
Table J-1
Command Name
SETSCANMODE
SETCHANNEL
SETRING
PHNPLACECALL
PHONEHANGUP
PHONEHOLD
PHONERESUME
PHNTRANSFERCALL
PHONEMUTE
Description
Set Walkie-Talkie into Scan mode.
See Device Modes on page 4-33
details about Do not disturb mode.
Set a particular Walkie-Talkie channel.
See Device Modes on page 4-33
details about Do not disturb mode.
Set a ring type.
Place a phone call to the given IP.
Hang up an active call.
Put an active call on hold.
Resume a call on hold.
Transfer an active phone call to some
other device/user.
Mute an active call.
Usage in Profile As Part of Menus
SETSCANMODE
Example:
for <entry ID="2" value="WT Scan
Mode:S:L:SETSCANMODE"/>
SetChannel:<Channel>:<Mode>
Example:
for <entry ID="1" value="My WT
Settings:S:L:SETCHANNEL:3:Normal"/>
SetRing:<Wave File>
Example:
<entry ID="1" value="Basic
Ring:S:L:SETRING:\Application\Wav\ringt
one basic.wav"/>
PHNPLACECALL:PBX(0) or
P2P(1):extension:port:DTMF string
Example:
<entry ID="1"
value="Call:S:L:PHNPLACECALL:1:192.1
68.7.172:5060:"/>
PhoneHangUp
Example:
<entry ID="1"
value="HangUp:S:L:PHONEHANGUP"/>
PhoneHold
Example:
<entry ID="2"
value="Hold:S:L:PHONEHOLD"/>
PhoneResume
Example:
<entry ID="3"
value="UnHold:S:L:PHONERESUME"/>
PHNPTRANSFERCALL:PBX(0) or
P2P(1):extension:port:DTMF string
Example:
<entry ID="1"
value="172:S:L:PHNTRANSFERCALL:1:1
92.168.7.172:5060:"/>
PhoneMute
Example:
<entry ID="9"
value="PhoneMute:S:L:PHONEMUTE "/>