Motorola CA50 Developer & User Manual page 39

Removing the Battery
Hold the device on its side and lift the release latch to disengage the battery from the device.
1.
Lift Release Latch
Figure 3-4
Insert a finger nail into the indent on the bottom of the battery and push downward. The battery should eject.
2.
Battery
Indent
Push Battery Indent
Figure 3-5
NOTE In the event of a tight battery fit, the battery may not drop out of the well as pictured in
this occur, releasing the battery latch adequately and pushing the battery indent lifts the battery slightly out
of the well so that it can be gripped and pulled out.
Release
Latch
Getting Started 3 - 5
Figure 3-5. Should