Rapid Deployment Window Options; Errors - Motorola CA50 Developer & User Manual

Rapid Deployment Window Options

Rapid Deployment Options
Table F-1
Window Option
Options
RD
Scan bar codes
to deploy device
Options
Reset
RD
UCA floor
UCA backroom
UCA roaming
Reset
Exit

Errors

NOTE If the UCA client application cannot connect to the server, it continues to retry until you cancel (exit) the
application. If failure to connect to the server persists, see the MSP Administrator.
Press the CA50 left soft key to display the default Options menu.
RD
Search network
About RD
Exit
Back
Scroll up and down the list and select an option:
• Search Network - Searches the current adapter (wireless network) and
performs actions based on the number of profiles established in the UCA
server.
For example, if only one store profile was defined in the UCA server, the
network is searched, profile data downloads to the device and triggers
the deployment process. If multiple department profiles were defined in
the UCA server, the network is searched and a profile list displays.
Select a profile from the list to download that department profile data to
the device which triggers the deployment process.
RD
Downloading
profile
Single Profile
• About RD - Displays information about Rapid Deployment.
RD
Search network
About RD
Press the CA50 right soft key to go back to the previous window.
Cancels an operation or window and return to the start window.
Closes the application and returns to the CA Menu.
Note: Exiting the application prior to scanning all required bar codes discards any
scanned data collected up to that point.
Description
RD
UCA floor
UCA backroom
UCA roaming
Multiple Profiles
Back
Rapid Deployment
Reset
F - 3