Table of Contents
Advertisement
Appendix F Rapid Deployment
Overview
The Rapid Deployment (RD) client on the CA50 client is used to scan staging bar codes. For details about the
parameters contained within the RD bar codes, see
NOTE
1. For a complete checklist outlining all the development and deployment activities required to implement
a CA50 solution, see the
2. For a table listing the most commonly requested topics within this manual, see the Quick Startup Guide
on the last page of the manual.
Accessing the Rapid Deployment Client
When the CA50 powers on for the first time, out-of-box, the CA Menu (see
highlighted selection on the CA Menu at the first power on is Rapid Deployment (see
Scanning Rapid Deployment Bar Codes
To stage a CA50 over a wireless connection:
Ensure the UCA server setup is complete and ready to deploy data to the UCA client. (See
1.
Requirements and Setup on page
Ensure the CA50 battery is fully charged (see
2.
Power on the CA50 (see
3.
CA Menu
Start
ment
Rapid Deploy
Programs
Settings
System info
CA Menu Window
Figure F-1
To select and launch the Rapid Deployment option from the CA Menu, use the Up and Down keys to highlight
4.
the Rapid Deployment application; press the Select (S) key to launch the application.
Staging and Deploying CA50s on page
Development and Deployment Checklist on page
6-7.)
Charging Batteries on page
Powering On the CA50 - Pre-deployment on page
12-2.
2-1.
CA Menu on page
3-12). The default,
Figure
F-1).
UCA Server
3-8).
3-11)
Advertisement
Table of Contents
Troubleshooting
