Table of Contents
Advertisement
Omni 3210 Installation Guide
Maintaining the Omni 3210
Cleaning the Terminal
To properly maintain your Omni 3210 terminal, clean it
regularly to remove dust, accumulations of dirt or grease, and
fingerprints. For the best results, use a clean cloth dampened
with water and mild soap. To remove stubborn stains, use
alcohol or an alcohol-based cleaner.
Caution: Never use thinner, trichloroethylene, or ketone-
based solvents to clean the terminal — they may deteriorate
plastic or rubber parts. Do not spray cleaners or other solutions
directly onto the keypad or display lens.
Cleaning the Printer
Every few months, check and thoroughly clean the integrated
thermal printer:
1.
Be sure the terminal is connected to a power source.
2.
Remove the paper roll cover.
3.
Lift out the paper roll and spindle from the paper roll
cradle, if necessary. Carefully cut the paper that is still
inserted in the feed mechanism from the roll.
4.
Press the paper feed button to eject the remaining paper
from the feed mechanism.
Note: Do not attempt to pull paper out from the back of the
printer. This could damage the paper feed mechanism. Use the
paper feed button instead.
30
Advertisement
Table of Contents
