Threading The Machine - Baby Lock Coronet BLCT16A Instruction And Reference Manual

Threading the Machine

Baby Lock recommends that you select and use only high-quality threads for your quilts.
To thread the machine
1. Place thread cone onto spool post ①, insert the thread through the thread-antennae eyelet ② from
back to front, continuing to the thread guide ③.
2. Continue to the three-hole thread guide ④. Wrap the thread through all three holes from back to
front, being careful not to cross threads. This is recommended for most threads. However, some very
delicate threads or metallic threads may require less tension. If you are having problems with thread
breaking, try threading only one or two holes of the three-hole thread guide.
3. The thread continues down to thread guide ⑤ and to the tension assembly ⑥.
 IMPORTANT: The thread must be flossed up between the two tension discs. If the thread is not
firmly in place between the two tension discs, the thread will lay on top of the tension discs (no
tension) and thread looping on the bottom of the quilt can occur.
28 |
www.babylock.com