Table of Contents
Advertisement
Threading the Machine
Threading the Upper Thread
1. Raise presser foot lever.
2. Press the needle up / down button or rotate the handwheel toward you to raise the needle in
the up position.
3. Place a spool of thread onto the spool pin and secure with the proper size spool cap.
(see Manual page 11)
4. Pass the thread around upper thread guide for upper threading
5. Bring thread forward down the right channel, then to the left and up the left channel.
6. Pull the thread through and into the take-up lever from right to left.
7. Pass the thread down the left channel and into the lower thread guide. Slide the thread from right
to left into the thread guide on the needle clamp.
8. Thread the needle from front to back or follow directions for needle threader on next page.
3
Advertisement
Table of Contents
