Baby Lock Coronet BLCT16A Instruction And Reference Manual page 39

To use Precision stitch regulation
• Touch the Regulated button and then press the Precision button.
Press to select
Precision mode.
After you press the Start/Stop button on the handlebars, you must begin moving the machine for it to
begin quilting according to the stitches-per-inch setting. When you begin moving the machine, stitching
begins. When you stop moving the machine, stitching stops but just until you move it again.
 NOTE: When using Precision stitch regulation, if you stop moving the machine but do not press the
Stop/Stop button, after two minutes it will time out and a message box appears to let you know you
will need to press the Start/Stop button to resume quilting.
U CAUTION: Always make sure the power is off when changing the needle, replacing the bobbin, or
placing your hands near the needle to avoid unwanted stitching in your quilt or in your fingers.
Machine Quilting Tip: When to use Precision stitch regulation
Precision stitch regulation mode is useful for ruler work. Stitch along the length of the ruler
for the span of your hand and stop moving the machine, but do not press the Stop button.
When you stop moving the machine, the needle pauses. Move the ruler and then begin
moving the machine to continue quilting. Precision stitch regulation helps you to avoid
bobbles and uneven stitches.
Press to select Stitch
Regulation.
Press the plus (+) or
minus (—) to change
the stitches-per-inch
setting.
Baby Lock Coronet User Manual
| 37