Table of Contents
Advertisement
Threading the Machine
THreADinG THe UPPer THreAD
3
2
1
1. Raise the presser foot lever.
2. Press the needle up / down button or rotate the handwheel toward you to raise the needle in the up position.
3. Place a spool of thread onto the spool pin and secure with the proper size spool cap.
4. Pass the thread into the thread guide for upper threading and snap forward between the thread guide
and guide plate.
5. Bring thread forward down the right channel, then to the left and up the left channel.
6. Pull the thread through and into the take-up lever from left to right.
7. Pass the thread down the left channel and into the thread guide at the base of the face cover.
8. Pass the thread from right to left into the thread guide on the needle clamp.
9. Thread the needle from front to back or follow directions for needle threader on next page.
4
4
6
6
7
5
7
8
9
8
5
9
3
Advertisement
Table of Contents
