Clock - Time; Displaying The Time; Setting The Time; Selecting 12/24-Hour Clock Mode - Blaupunkt brisbane sd48 Operating And Installation Instructions

Clock – Time

Displaying the time

You can display the time in the tuner, SD,
USB and CD changer mode.
Press the button DIS ; repeatedly un-
u
til the time appears.

Setting the time

To set the time,
press the MENU button >.
u
The display shows "MENU".
Press the or
u
until "CLOCK SET" appears on the dis-
play.
Press the button 2 to open the sub-
u
menu.
The currently set time appears on the dis-
play. The hours fl ash and can be adjusted.
Adjust the hours with the
u
ton 2.
Once the hours are set,
press the button 2.
u
The minutes fl ash.
Adjust the minutes with the
u
ton 2.
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
button 2 repeatedly
or but-
or but-
Selecting 12/24-hour clock
mode
Press the MENU button >.
u
The display shows "MENU".
Press the or
u
ly until "24 H MODE" or "12 H MODE"
appears on the display.
button 2 to call up the
Press the
u
submenu.
button 2 to switch be-
Press the
u
tween the modes.
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Displaying the time with device
and ignition switched off
To display the time when the device is off
and the vehicle ignition is on,
press the MENU button >.
u
The display shows "MENU".
Press the or
u
ly until "CLOCK OFF" or "CLOCK ON"
appears on the display.
button 2 to call up the
Press the
u
submenu.
button 2 to switch the
Press the
u
display between ON and OFF.
When you have fi nished making your
changes,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Clock – Time
button 2 repeated-
button 2 repeated-
23