Getting Started; For First Time Use; Connect To Power Source; Location Selection - Oregon Scientific WL388 User Manual

GETTING STARTED

FOR FIRST TIME USE

Inside the package is a plastic insert, for vertically
supporting the wake-up light on a table-top.
Insert the plastic stand into the slot at the rear of the light
with some pressure until you hear a click.

CONNECT TO POWER SOURCE

 Put the plug into the wall socket and connect the jack to the unit.
1. Use only the power adapter supplied with this product. To order a replacement power adapter,
please contact our customer service.
2. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.

LOCATION SELECTION

Before selecting a location to place the unit, consider the following:
 Ensure there is approximately 15 cm between unit and nearest object, such as walls or other
objects.
 Ensure there is at least 40 cm of space above the top of the unit for ventilation purposes.
 Ensure the distance between the unit and the wall socket is not longer than the power cord itself.
The main unit should not be exposed to wet conditions. No objects filled with liquid, such as
vases, should be placed on the main unit.

CLOCK

You can set the clock using the main unit as well as your mobile
device. However, the clock will be updated once the main unit is
connected with your mobile device through Bluetooth.

MANUALLY SET CLOCK

1. After plugging in the power adapter or pressing RESET on the main
unit, the main unit will display the connection ID and then
automatically enters clock setting mode.
2. The setting sequence is 12/24-hr format, then hour, then minute.
3. Press / to change the settings, or press and hold
rapidly change the settings.
4. Press any button ( / / / ) to confirm settings.
/ to