Advertisement
FRONT VIEW
BACK VIEW
BOTTOM VIEW
REMOTE SENSOR
POWER SUPPLY
Adapter
The adapter powers the unit. Plug adapter into socket, making sure the adapter is not obstructed and is easily accessible to the unit.
To completely disconnect from power, the adapter should be disconnected from the main unit.
NOTE
The main unit and adapter should not be exposed to wet conditions. No objects filled with liquid, such as vases, should be placed on the main unit and adapter.
1 x CR2032 battery for memory back-up
To insert batteries:
LOCATION | MEANING |
Clock area | Main unit batteries low |
Outdoor temperature area | Sensor batteries low |
To set up the remote sensor:
TIP
The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
NOTE
Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
SENSOR DATA TRANSMISSION
Outdoor sensor:The sensor reception icon in the remote sensor area shows the status:
ICON | DESCRIPTION |
Main unit is searching for sensor(s) | |
A channel has been found | |
The sensor cannot be found |
NOTE
If the sensor is not found, check the batteries, obstructions and remote unit location. Press and hold SEARCH to force another sensor search.
For best results:
TIP
Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading.
CLOCK RECEPTION
This product is designed to synchronize its clock automatically with a clock signal.
RRM902: EU: DCF-77 signal: within 1500km (932 miles) of Frankfurt, Germany.
RRM902U: UK: MSF-60 signal: within 1500km (932 miles) of Anthorn, England.
RRM902A: US: WWVB-60 signal: within 3200km (2000 miles) of Fort Collins, Colorado.
To enable / disable signal reception:
Press and hold VOL+ to enable, or VOL- to disable signal reception.
NOTE
Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.
If signal reception is unsuccessful, place your unit next to a window, press and hold VOL+ to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL | WEAK / NO SIGNAL |
MANUALLY SET CLOCK
To set the clock manually, disable the clock signal reception first.
The setting order is: time zone offset, 12/24-hour format, hour, minute.
RMR902 / RMR902U: Time zone offset sets the clock +/- 23 hours from the received clock signal time. If you have deactivated the clock signal reception, do not set a value for time zone.
NOTE
If you enter +1 in the time offset setting, this will give you your local time plus one hour. If you are in the US (RRM902A) set the clock to:
0 for Pacific time
+1 for Mountain time
+2 for Central time
+3 for Eastern time
SOOTHING SOUNDS
To activate / deactivate soothing sounds:
To toggle soothing sounds:
RADIO
To activate / deactivate radio:
NOTE
This will automatically turn off the soothing sound. To set radio station:
For your convenience, the volume and radio frequency will be stored in memory for the next time radio is turned on.
To view alarm display (when radio is on):
MUSIC FROM EXTERNAL AUDIO DEVICE
Using a cable, plug one end to your music storage device and one end to audio line-in socket ( ) located at the back of unit.
When cable has been successfully connected, will be displayed on the LCD screen and sound will emit from speakers.
NOTE
VOLUME CONTROL
To set the alarm:
The setting order is: Hour, minute, alarm option ( soothing sound / beep or Radio), sound type (1-8: soothing sound, 9: beep) or radio station, volume (cannot be adjusted for beep alarm).
To toggle alarms ON / OFF:
To silence the alarm:
To activate light show (looped):
To stop light show at a particular color:
Each soothing sound is programmed with a unique colorchanging light show which complements the music, improves the ambience and adds a decorative touch to any room.
To start programmed light show:
To deactivate light show:
To activate audio sleep timer:
NOTE
To select duration:
To view time remaining:
NOTE
If external audio device is plugged in while sleep timer is on (and radio / soothing sound is not playing), OFFZ Z will be displayed briefly to indicate sleep function has been temporarily disabled.
To toggle temperature unit:
To adjust brightness:
Press RESET to return to the default settings.
TYPE | DESCRIPTION |
Main unit | |
L x W x H | 155 x 43 x 145 mm (6.1 x 1.7 x 5.7 in) |
Weight | 526 g (18.6 oz) without battery |
FM | 87.5 to 108 MHz |
Power | 4.5V adapter and 1x CR2032 for memory back-up |
Remote Sensor (THN132N) | |
L x W x H | 92 x 60 x 20 mm (3.6 x 2.4 x 0.8 in) |
Weight | 62g (2.22 oz) |
Transmission range | 30m (98 ft) unobstructed |
Frequency | 433 MHz |
Temperature range | -30°C to 60°C (-22°F to 140°F) |
Power | 1 x UM-3 (AA) 1.5V battery |
NOTE
The technical specifications for this product and the contents of the user manual are subject to change without notice.
NOTE
Features and accessories will not be available in all countries. For more information, please contact your local retailer.
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products.
If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp
For international inquiries, please visit: www2.oregonscientific.com/about/international.asp
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Oregon Scientific RRM902, RRM902U, RRM902A Rainbow Clock Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the RRM902 that isn't answered in the manual? Leave your question here.