Table of Contents
Advertisement
GETTING STARTED
SET UP
1. Insert batteries before first use, matching the polarity
(+ and -) as shown:
1
1
Fat 101_M_EN_V0.p65
3
3
2
2
6
6
The unit uses 2 x CR2032 batteries. The backlight battery
powers the backlight while the main battery powers all
other functions.
NOTE
shows when main battery is low.
when backlight battery is low.
2. Once the batteries have been inserted the unit will
immediately ask you to set the clock reception signal
(see Clock Reception section for signal options).
3. Roll the + / – button towards + to scroll through the
signal options.
4. Press the MODE button down to confirm.
5. For the time to be correct time you MUST select your
OWN city (see Clock Settings section for how to do
this).
2005.8.4, 4:01 PM
shows
Advertisement
Table of Contents
