Oregon Scientific’s Sunrise Wake-up Clock (WS902) prepares the body to wake up by gradually increasing brightness to the set level in the 20 minutes prior to desired (set) alarm time.
2. Press + or - to change the settings or press and hold + / – to rapidly change the settings. 3. Press SET CLOCK to confirm and move to next setting. The settings order is: 12/24 hr format, time.
ALARM WITH WAKE UP LIGHT To activate / deactivate wake up light: • Slide WAKE UP LIGHT switch to ON / OFF. When wake up light has been activated, will be displayed next to ALARM on the LCD screen. NOTE Light will fade-in (gradually increase in brightness to maximum) 20 minutes prior to set alarm time.
TROUBLESHOOTING The below table lists out some of the problems you could encounter. If you are unable to solve the problem, contact the Customer Care Centre in your country. Contact us via www2.oregonscientific.com/service/support.asp Problem Possible cause The unit does not Power supply? work The unit does not...
When disposing of this product, ensure it is collected separately for special treatment. • Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information.