Alarm - Oregon Scientific WL388 User Manual

In step 1 above, after pressing RESET, there is a screen
displaying a random four-digit connection ID, which is the password for
logging into the application with your mobile device. (See: Connect
with Your Mobile Device.) You can write down the four-digit number
for future use with other mobile devices.

ALARM

You can set 1 alarm on the main unit or 5 alarms through your mobile device, with different alarm
sounds.
To set the alarm:
1. Press and hold to enter setting mode.
2. The setting sequence is hour, minute, light ON/OFF and alarm sound.
3. Press / to adjust value
4. Press again to confirm setting.
OR
Do not press any button to exit the setting.
In order to wake you gently, the sunrise and sound will start 20 minutes and 5 minutes,
relatively, before alarm time.
Please see the section Alarm with Soothing Sound for details on the alarm sound.
It is recommended that the main unit is not placed too far and not lower than your head while
in a sleeping position. Make sure the sunrise is not blocked by bed, duvet or pillow.
The brightness intensity of the sunrise follows the default setting.
To active/deactivate the alarm:
After setting the alarm, you can toggle
active ( appears on the display screen), or
deactivate the alarm at any time.
OFF indicates the alarm function has been disabled.
To silence the alarm:
Once the alarm sounds each day, there will be 3 snooze times, at 8
minutes each. During the 8-minute snooze, the
indication.
Tap the top of the light to snooze until the 3rd snooze sound ends.
OR
to
icon will flash for