Wall Mount Instructions; Factory Presets - Cortelco Colleague 2200 Owner's Instruction Manual

WALL MOUNT INSTRUCTIONS

1. Install wall mount bracket in wall mount position and route cords as shown in
diagram below.
2. Connect the adapter and the line cord. See Steps 2 & 3 on preceding page for
specific instructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount
position, plug the coiled cord into the handset, and then plug the other end of the
cord into the case.
4. Place the handset on the base.
1
Desk
Wall Mounting Bracket Positions
3
Desk top position
Handset Hook

FACTORY PRESETS

The following table shows you the factory settings for your unit:
Display Setting
Language English
LCD Contrast 2
Area Code no setting
LDS Code 1
Access Code _
Note: After you have set up the unit completely for the first time, use the MENU button
to review or reprogram the Language, Contrast, Area Code, LDS Code or Access Code.
2
AC POWER
ADAPTER
Wall
Wall Jack Mounting Views
4
Wall mount position
3
Wall Jack