Setup - Cortelco Colleague 2200 Owner's Instruction Manual

SETUP

After the adapter is connected, the display will show as indicated below for setting
1. [ SET LANGUAGE ] appears on the display. Press the REVIEW UP ( ) button to
select the language. E - English, F - French, S - Spanish, and then press the DIAL
button to confirm the selection.
2. When [ LCD CONTRAST ] appears, press REVIEW UP ( ) button to set the con-
trast darker, and then you can press REVIEW DOWN ( ) button to set the contrast
back to the preset.
3. When [SET AREA CODE ] appears, use REVIEW UP ( ) button and REVIEW DOWN
( ) button to set your local area code.
REVIEW UP ( ) button - to change the digit from -. 0, 1, 2, -9
REVIEW DOWN ( ) button - to move to the next digit.
When you are finished setting the local area code, press Dial.
4. When [ SET LDS CODE ] appears, press REVIEW UP( ) button to change the long
distance code from -, 0, 1, 2, -9. When you are finished, Press DIAL. The display
will indicate as shown (Stand-By Screen) and be ready to receive incoming calls.
You have to set the LDS code as 1 when you are in the USA or Canada.
5. When [SET ACCESS CODE] appears, use REVIEW UP ( ) button to set your
access code. The Code can range from _ to 9. The Access Code is used to obtain
an outside line when using a PBX and some Centrex applications. This feature can
be used with Caller ID and Memory Locations.
6. The time and date are automatically set when a caller ID (CID) number is received.
The unit will keep the current time accurately, and is updated each time a CID
number is received.
E
SET LANGUAGE
2
LCD CONTRAST
- - -
SET AREA CODE
Standby Screen
1
SET LDS CODE
4