Hold Button; Flash Button; Headset Compatible; Data Port - Cortelco Colleague 2200 Owner's Instruction Manual

HOLD BUTTON

1. To place a call on hold, press the HOLD button and hang up the handset. The HOLD
Indicator will light up and remain lighted until you resume your conversation.
2. To resume your conversation, lift the handset or that of any extension phone on the
same line or press and release SPEAKERPHONE. The HOLD indicator will go out
and your call can continue.

FLASH BUTTON

This telephone provides a line break signal for accessing PABX service or for conve-
nient use of Call Waiting from your local telephone company. If you have Call Waiting
service, you can alternate the Call Waiting function per the following instructions.
1. While having a conversation, another party calls and you hear a tone.
2. Press the FLASH button once and release. The first conversation is placed on hold
and the second call can be answered.
3. Press FLASH button again and release. The first caller can be spoken to again and
the second call is placed on hold.
Flash can also be used when storing numbers in memory locations to transfer a call to
a new extension.
Note : If you also have subscribed to Call Waiting Caller ID service, please see Call
Waiting Display below

HEADSET COMPATIBLE

This telephone will accept a 2.5mm cell phone-style headset or an RJ-type headset. To
enable headset mode, move the switch on the right side of the phone (see Page 7 for
switch location) to the ON position. The SPEAKERPHONE button is used to connect or
disconnect from a call.
Note: With the headset switch turned to the ON position, the speakerphone feature will
be disabled.

DATA PORT

This is a connection which is in parallel with the telephone line. It allows the connection
of a device such as a modem, caller ID, or an answering machine.

CALL WAITING DISPLAY

In the past, if you had call-waiting service, a tone alerted you there was a new call
coming while you were on an existing call.
Now our Call Waiting Caller ID not only tells you there is another call waiting, but lets you
10