Telephone Features; Pulse And Tone Dialing; Receiving A Phone Call; Placing A Phone Call - Cortelco Colleague 2200 Owner's Instruction Manual

T
ELEPHONE

PULSE AND TONE DIALING

1. If your telephone line accepts a touch-tone dialing, set the PULSE/TONE switch
to the Tone position.
2. If your telephone line requires a rotary (pulse) dialing, set the PULSE/TONE
switch to the Pulse position.
3. If you are unsure which system you have, set the switch to the TONE position.
Lift the handset. When you get a dial tone, dial a telephone number. If the dial
tone continues, move the switch to PULSE, and then dial the telephone number
again.
Note : In order for the Caller ID callback to work (see Using the Caller ID Function),
you must set the PULSE/TONE switch to the Tone position.

RECEIVING A PHONE CALL

1. Be sure the RINGER switch is set to the HI or LOW position.
2. When the phone rings and the caller's information shows on the display window
(refer to Using the Caller ID Function), lift the handset or press the SPEAKER-
PHONE button and begin your conversation.
3. Set the Ringer switch to the OFF position when you do not want to be interrupted
by the phone ringing. Remember to set the ringer switch back to Hi or Low when
you want to receive calls again.

PLACING A PHONE CALL

1. Lift the handset or press the SPEAKERPHONE button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the display
window.
SPEAKERPHONE BUTTON (AC Adaptor must be used to ensure proper function)
1. Receiving Incoming Calls
a. When the phone rings and the callers information shows on the display
window (refer to Using the Caller ID Function), press and release the Speak-
erphone button and talk normally into the built-in microphone from a distance
of 5-6 inches.
F
EATURES
7