Receiving Calls - Cortelco Colleague 2200 Owner's Instruction Manual

seconds if the message waiting off signal is sent from the Central office.
IF YOU ARE IN AN AREA WHERE AN FSK SIGNAL IS NOT AVAILABLE:
1. This unit will check your line for a stutter dial tone every time you hang up or each
time a call goes unanswered. The MESSAGE indicator will flash when there is a
message waiting.
2. You may experience some delay in seeing the MESSAGE indicator light up even
though there are messages in your rnail box. This delay is due to regulatory
matters and does not indicate a problem with the unit.
This unit may not be activated or deactivated under certain conditions. For example,
when you retrieve your message from an outside phone (not your own telephone
number), the MESSAGE indicator may not be canceled when you return home. If you
experience this situation, pick up the receiver and hang up. The MESSAGE indicator will
cancel.

RECEIVING CALLS

1. When the telephone is not in use and a new call is received, the display will show
the NEW symbol, the phone number, the caller s name, and time and date of the call
for 20 seconds. The RPT (re peat) symbol will appear if the call has come in more
than once.
REPEAT SYMBOL
8:59
AM
RPT
AM
TOTAL CALLS 06
2. After 20 seconds with no activity, the display will default to the Stand-By screen
and remain on until another call is received or a button is pressed. This will show
you the total number of calls stored .
8/24 CALL# 06
NEW
765-555-1234
NEW SYMBOL
JOHN SMITH
8:59 8/24 05
CALL#
NEW
12