To Dial A Phone Number In Memory; Volume Button; Redial Button; Pause Button - Cortelco Colleague 2200 Owner's Instruction Manual

To store in a keypad memory location - Press one of the keypad buttons (l, 2,
•
3, or 0).
5. Use pull out memory index to write in name and the memory button where it is
stored.

To Dial A Phone Number In Memory

1. Lift the handset and wait for a dial tone.
2. Press any memory location.
To dial an auto memory button (located on right-band side of base) - Press the
•
desired auto memory button (1, 2, 3.... or 10).
To dial a keypad memory location - press the MEM DIAL button first, and then
•
the desired keypad button (1, 2, 3.... or 0).
3. The number will be displayed and dialed automatically.

VOLUME BUTTON

A built-in amplifier feature allows you to increase the listening volume in the receiver of
the handset when speaking with your party. When needed, press the VOLUME button
to achieve four different levels.

REDIAL BUTTON

1. If the number you dialed is busy, or you want to call the last number dialed again,
lift the handset, or press and release the hookswitch for a new dial tone.
2. Press REDIAL. The number will appear on the display window.
3. The last number called (32 digits maximum) will automatically be redialed.

PAUSE BUTTON

The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence. This
is particularly useful if you are connected to a PABX system where you must dial an
access code (usually the number 9) to obtain an outside line.
1. Press the PAUSE button once and release at any point in the dialing sequence
where a pause is desired.
2. The PAUSE button can be pressed more than once to create a longer pause.
9