Callback; Options Button - Cortelco Colleague 2200 Owner's Instruction Manual

CALLBACK

When reviewing received calls, there are two ways to dial the telephone numbers
shown on the display by pressing DIAL.
With the handset in its cradle (on-hook), press DIAL. [ PICKUP PHONE... ] " will
1.
appear in the LCD display to ask you to pick up the handset. The number will be
dialed after you pick up the handset.
2. If you pick up the handset, review the calls, and press DIAL, the displayed number
will be dialed immediately.
Note : The HANDSET symbol will light up in the upper left hand corner of the LCD
display when the handset is picked up.
If [ SET AREA CODE ] appears prior to [ PICKUP PHONE... ] " or dialing, it means you have
not programmed the local area code. Please hang up the telephone and program the
area code.
1. If a local call (a telephone number with the same area code as you set) is reviewed
and its 7-digit number displayed, press DIAL to dial the number displayed.
2. If a long distance call (a telephone number with a different area code than you set)
is reviewed and its 10-digit number (3-digit area code + 7-digit telephone number)
is displayed, press DIAL to dial the number displayed.

OPTIONS BUTTON

The OPTIONS button allows you to change the format of the displayed number The
available format follows:
7-digit 7-digit telephone number.
10-digit 3-digit area code + 7-digit telephone number.
11-digit long distance code 1 + 3-digit area code + 7digit telephone number.
If a local call, and its 7-digit number is displayed:
Pressing OPTIONS once will change it to a 10-digit format (your area code +
•
7-digit number).
Pressing OPTIONS twice will change it to an 11-digit number (1 + your area
•
code + 7-digit telephone number).
Pressing OPTIONS three times will go back to the original 7-digit telephone
•
number.
HANDSET SYMBOL
8:59 CW 9/24 36
CALL#
PM NEW
914-655-1234
PICKUP PHONE...
14