Telephone Usage; Installation - Cortelco Colleague 2200 Owner's Instruction Manual

T

INSTALLATION

1. Connect the adapter. Plug the large part of the adapter into the wall outlet and the
adapter tip to the jack at the rear side of unit. (Use only 9V DC. 200mA, center
positive Class 2 adapter.)
2. Connect the telephone line cord.
a. To connect without an answering machine.
Use the new line cord to connect the PHONE jack of your new caller ID
•
phone to the modular wall jack.
Adapter
b. To connect with an existing answering machine.
Use the existing line cord supplied to connect the LINE jack of your
•
answering machine to the wall modular line jack.
Use the new line cord supplied to connect the telephone's jack of your
•
new Caller ID phone to the PHONE jack of your answering machine.
Set your answering machine to answer the phone after 2 or more rings.
•
Adapter
3. Follow the procedure "Unit Setup" to set up your unit.
4. Place the unit on a flat table or mount it on a wall. If you desire to place it on a wall,
use the wall mount bracket and short line cord supplied to accomplish the wall
mounting.
U
ELEPHONE SAGE
Modular
Wall Jack
1
Modular
Wall Jack
Answering
Device